Doctor's Column

Why Facial Volume Distribution Matters Before a Lifting Treatment

Author
IN SEOK KYUNG
Date
2026.11.18
Views
82

Why Facial Volume Distribution Matters Before a Lifting Treatment

Ultherapy, Thermage and XERF: Where to Treat and Where to Avoid

Hello, this is the medical team at DORÉ CLINIC.

Today, we'll take a closer look at why assessing facial volume distribution is important before undergoing a lifting treatment.


Lifting treatments are designed to tighten the skin, but patient satisfaction often depends first on the distribution of facial volume. Even within the same face, some areas may have excess fat that needs to be reduced or repositioned, while others are already hollow and need to be preserved. This article divides the face into different volume zones and compares the tissue layers targeted and heat delivery methods of Ultherapy, Thermage, and XERF, based on FDA clearance documents and peer-reviewed studies. The key takeaway is simple: placement matters more than intensity.

One of the most common questions during lifting consultations is not “Which treatment should I choose?” but rather, “Will my cheeks become more hollow?” To answer this question, understanding the layers of facial anatomy is more important than simply comparing treatment devices.

Q1. Why assess facial volume before planning a lift?

Facial aging involves two processes that occur simultaneously. First, the skin and its supporting structures gradually lose firmness. Second, facial fat compartments lose volume and shift downward. These changes have different causes and require different treatment approaches.

The challenge is that these changes can occur in opposite ways within the same face. Fat accumulation and sagging may occur beneath the chin and in the lower cheeks, making these areas potential treatment targets. Meanwhile, the temples and areas beneath the cheekbones may have already lost volume, creating hollow contours and shadows. Treating the entire face as one area with the same energy intensity may improve the former while making the latter more pronounced.

That's why a lifting treatment plan should start not with “How much energy should be used?” but with “Where should energy be applied, and which areas should be avoided?” Skipping this step may result in a technically successful treatment but an unsatisfactory overall appearance.

Q2. Facial volume is not a single uniform layer

Anatomical research shows that facial subcutaneous fat is not one continuous layer. It consists of multiple compartments separated by connective tissue partitions. These compartments age differently: some lose volume, some shift downward and others may even become thicker.

Treatment Area

Aging Changes

Lifting Strategy

Temples

Volume Loss and Hollow Shadows

(Preserve) Minimize Deep Energy

Below the Cheekbones

Fat Loss and Hollow Cheeks

(Preserve) Prioritize Volume Restoration

Inner Cheeks

Fat Migration and Sagging

May Benefit from Treatment

Lower Cheeks and Jawline

Fat Accumulation and Sagging

(Preserve) Focus on Lifting

Forehead and Eye Area

Thinning Skin and Fine Lines

Focus on Skin Quality

A 2026 retrospective study on XERF illustrates these anatomical changes through objective measurements. Researchers divided the face into medial and lateral regions based on the line of ligaments and compared 3D images before and after treatment. They observed a decrease in volume in the medial region and an increase in the lateral region, a pattern described as “volume redistribution.” Since no filler was injected, this finding was interpreted as indirect evidence of tissue repositioning.

The clinical implication is clear: lifting treatments do not add volume but rather redistribute existing tissue. Therefore, in areas where volume is already depleted, there may be less tissue available for repositioning.

Q3. Four Reasons Cheeks May Look Hollow After a Lifting Treatment

When a face appears more hollow after treatment, there is not necessarily a single cause.

Failing to distinguish the following four possibilities during a consultation can lead to repeated treatments that do not address the actual issue.

① Pre-existing hollows

The temples or areas beneath the cheekbones may already have been hollow before treatment. As the surrounding skin becomes firmer, shadows in those hollows may stand out more. This can be a change in visual contrast rather than an actual reduction in tissue.

② Weight loss

If you have lost weight recently, facial fat may have decreased as well. It's important to compare the timing of your weight change with the treatment date.

③ Swelling subsiding

As the initial post-treatment swelling resolves, the face may appear smaller. Its appearance two to four weeks after treatment is not necessarily the final result.

④ Heat-related changes to fat

Studies have reported that heat from ultrasound and radiofrequency lifting may affect subcutaneous fat. There are studies of focused ultrasound used to reduce fullness in the cheeks, as well as rare case reports of fat atrophy.

Q4. How Do Ultherapy, Thermage and XERF Deliver Heat Differently?

Grouping all three devices under the word “lifting” can obscure important differences. They use different energy sources, reach different tissue depths and may affect fat differently.

Category

Ultherapy PRIME

Thermage FLX

XERF

Energy

Focused Ultrasound (HIFU)

Monopolar Radiofrequency (RF)

Dual-Frequency Monopolar RF

Treatment Depth

1.5 / 3.0 / 4.5 mm

Full Dermis (Volumetric Heating)

Three Depth Modes

Heating Pattern

Discrete Coagulation Points (60–70°C)

Broad Volumetric Heating

Two Frequencies Delivered Sequentially per Shot

Primary Target

SMAS and Deep Dermis

Dermal Collagen

Dermis to Subcutaneous Fat

FDA Clearance

Eyebrow, Submental and Neck Lifting

Periorbital Wrinkles (Including Upper and Lower Eyelids) and Wrinkles

Clinic

Real-Time Imaging

Yes (Up to 8 mm)

No

No (Impedance Synchronization and Surface Temperature Monitoring)

The two most important comparisons in this table are the final rows. Ultherapy provides ultrasound visualization of tissue layers while energy is delivered. This allows the clinician to identify thin fat layers and adjust the treatment depth. Thermage and XERF, by contrast, do not provide imaging and instead use controls such as impedance and surface-temperature monitoring. Their use therefore relies particularly on the clinician's understanding of facial anatomy.

The U.S. FDA clearance for XERF is for “electrocoagulation and hemostasis in dermatologic and general surgical procedures.” Its use for lifting in clinical practice draws on the tissue-contraction effects of coagulation; lifting itself is not explicitly stated as the cleared indication. Ultherapy, by comparison, has expressly cleared indications for lifting the eyebrow, submental area and neck. This is a distinction in regulatory documentation, rather than simply marketing language, and should be explained accurately during consultation.

Q5. Which lifting approach is appropriate for each facial area?

Device selection should be guided by the thickness of the tissue layers and the treatment goal, not personal preference alone. The following are general clinical principles; an individual protocol will depend on skin and fat thickness.

Area

Goal

Suggested Approach

Precautions

Under the Chin / Double Chin

Address Fat Fullness and Sagging

Ultherapy (4.5 mm) or XERF Deep Mode

Avoid the Thyroid and Nerve Pathways

Jawline

Refine Contours

Ultherapy 3.0 / 4.5 mm or XERF

Avoid Overtreatment When Lower-Cheek Fat Is Limited

Lower / Inner Cheeks

Address Sagging

Thermage or XERF Medium-Depth Mode

Minimize Repeated Passes

Temples

Preserve Volume

Minimize Energy; Restore Volume if Needed

Avoid Repeated Deep-Layer Passes

Below the Cheekbones

Preserve Volume

Prioritize Volume Restoration Over Lifting

Avoid Concentrated Energy in Hollow Areas

Eye Area / Forehead

Improve Skin Quality

Thermage Eye Tip or XERF Eye Tip

Protect the Eyes; Avoid the Orbital Bony Rim

The principle is straightforward: where fat is thicker and tissue has sagged, deeper treatment may be appropriate; where skin is thin and already hollow, use shallower treatment or avoid energy altogether. Applying a uniform protocol across the entire face without mapping these differences is a common cause of disappointing outcomes.

Q6. For Existing Hollows, Restore Volume Rather Than Lift

Lifting devices can tighten and reposition lax tissue, but they cannot recreate volume that has been lost. If hollow temples or sunken areas beneath the cheekbones are the main concern, a different approach may be needed.

For gradual volume loss across a broad area, collagen-stimulating biostimulators such as Sculptra or Radiesse may be considered. For smaller, clearly defined depressions, hyaluronic acid filler may be an option. Conversely, if sagging is the main concern and hollowness is limited, it may be more reasonable to perform lifting first, assess the outcome and add volume later if needed.

Mentioning both lifting and volume restoration during one consultation does not mean treating the same problem twice. Lifting addresses lax tissue; volume treatment addresses areas where tissue is lacking. The order matters, however. Allowing two to three months after lifting before deciding on filler can help reduce the risk of overcorrection.

Q6. Summary

The outcome of a lifting treatment depends less on a device's maximum power than on which areas receive energy and which areas are spared. Thicker, sagging tissue may benefit from deeper tightening, while already hollow areas should be preserved and supplemented with volume if necessary.

Ultherapy uses ultrasound imaging to identify tissue layers while targeting deeper structures. Thermage heats a broad volume of dermal tissue to address skin quality. XERF uses two frequencies to deliver energy across superficial and deeper layers during a treatment. These devices need not be competitors; they serve different tissue layers and goals. Before asking “Which is better?”, ask “Which layer of my face actually needs treatment?”

Why check facial volume distribution before lifting?

Because lifting does not add volume; it repositions existing tissue. Delivering energy to areas that are already hollow may make shadows more noticeable, so it's important to identify which areas should be treated and which should be preserved.

What is the biggest difference between Ultherapy PRIME and Thermage FLX?

Ultherapy uses focused ultrasound to create discrete coagulation points at depths of 1.5, 3.0 and 4.5 mm. Thermage uses 6.78 MHz monopolar radiofrequency to heat broader areas of the dermis. Their target layers and heating patterns are different.

What is XERF?

XERF is a dual-frequency monopolar RF device that delivers 6.78 MHz and 2 MHz sequentially in one shot and has three depth modes. Its FDA clearance is for electrocoagulation and hemostasis; its lifting application draws on the tissue-contraction effect.

Can people with little facial fat still have lifting treatments?

Yes, but the treatment area and depth must be adjusted. Concentrated deep energy should be avoided in volume-deficient areas such as the temples and beneath the cheekbones, and separate volume restoration can be planned if necessary.

The Future of Beauty Is About More Than Looking Younger

We cannot stop time, and no treatment can keep skin in a youthful state forever.

But as our understanding of skin aging and changes in collagen deepens, technologies continue to evolve that aim to improve the skin's natural firmness and preserve natural beauty. Where and how to use these technologies, however, remains a separate and equally important question.

Lifting outcomes depend more on treatment placement than on sheer intensity. The same face can contain areas with remaining fat and sagging that may benefit from tightening, alongside areas that are already hollow and should be protected. Under the chin and in the lower cheeks, fat accumulation and sagging may occur together. At the temples and beneath the cheekbones, volume may already have been lost, creating visible shadows.

Aging does not progress in just one direction. Sagging caused by lax skin and hollowing caused by the loss of fat-compartment volume have different causes, progress at different rates and require different tools. In this sense, lifting is less about adding something new than about repositioning existing tissue and volume.

The devices also target different tissue depths. Ultherapy PRIME uses microfocused ultrasound (MFU) to create thermal coagulation points at three depths 1.5 mm, 3.0 mm and 4.5 mm reaching structures beneath the epidermis, including the SMAS and platysma. Real-time ultrasound imaging allows the clinician to visualize tissue layers up to 8 mm deep and select a depth accordingly. It may therefore be considered for areas such as the jawline and lower cheeks, where thicker supporting structures need to be addressed.

Thermage FLX uses 6.78 MHz monopolar radiofrequency to heat a broad volume of the dermis, encouraging collagen contraction and remodeling. Instead of concentrating on fixed focal points, it distributes heat across a wider area. This gives it a distinct role when improving skin texture and firmness is more relevant than restoring lost cheek volume.

XERF combines two radiofrequencies, 6.78 MHz and 2 MHz, and uses three depth modes to transfer heat across the dermis and subcutaneous fat. Its design allows superficial and deeper layers to be addressed within one treatment, making it an option to consider when lifting and skin-quality concerns overlap.

In other words, devices grouped together as “lifting” do not necessarily heat the same tissue layers. Choosing a device is therefore not simply a comparison of equipment, but a decision about which area and depth of this particular face needs treatment.

At DORÉ CLINIC, we see these three technologies as more than lifting devices. They are tools for carefully planned anti-aging care that begins with an understanding of structural changes in the skin and each person's unique aging pattern. Patients seeking lifting treatments in Gangnam, Seoul, often ask not “Which treatment should I get?” but “Will my cheeks become more hollow?”

Our approach begins with a careful assessment of skin thickness and elasticity, facial structure and volume distribution, and the tissue layers in which signs of aging are most pronounced. We then plan the energy settings and treatment strategy accordingly. When appropriate, combining devices with different depths and heat-delivery patterns can be part of that plan.

This reflects DORÉ CLINIC's philosophy: rather than applying the same protocol to everyone, we aim for changes that are individually appropriate and naturally balanced.

Beyond simply tightening the skin.
Rather than promising to turn back time.
First, understand the map of facial volume.
Then consider how to preserve the skin's own firmness and beauty for longer.

DORE CLINIC — Natural anti-aging care, guided by science and precision.

#Ultherapy Prime in Seoul Gangnam#Thermage FLX in Seoul Gangnam#XERF in Seoul Gangnam

Consultation and Reservation Inquiries

Please feel free to contact us with any questions you may have.